Introduction  News Version 5 Upgrade Description  Schematic  Construction  Testing  Instructions Software Vintages References  Ordering Info Download the Instruction Manual Here HomeSeer Setup

  Please Read the FAQ's

(we're not kidding - we get a lot of e-mails with questions that are already addressed in the Frequently Asked Questions web page)

 

Download the S19 Hex code for V5.13 here.


Version   

Date

Major Changes from Previous Loads

5.13 6/1/2003 Added additional character input buffering to eliminate need to add delays between command input and parameter input.
5.11 2/1/2003 Added timeout for inactive inputs (to avoid locking up TEMP05 if a power failure occurs).  Added On/Off input to the DEB command.  Added a >100% indicator for humidity readings.  Fixed a bug where a DIS display in the middle of a sensor poll would disrupt the sensor ID numbers.  Fixed a bug where Polling Interval =0 would still cause a 1 minute poll.
5.10 1/2/2003 Added ability to use either 93C66 or 93C56 EEPROM.
5.00 12/13/2002 Many new features added - go here for details.
4.25 3/4/2002 Added 93C66 EEPROM capabilities.
4.24   Minor tweaks to code size
4.23 12/15/2001 Added parasitic check and display for DIS and QTY commands.
4.22 10/26/2001 Fixed HUM command to ensure continuation of humidity readings even after an error on one reading.
4.21 9/1/2001 Added support for DS18B20 and DS1822 temperature sensors.  Added check on OW bus for shorts or reversed sensors.  QTY command now counts DS18S20, DS18B20 and DS1822 sensors separately.  Changed sensor numbering to start at 1 instead of zero.
4.20 8/30/2001 Fixed bug in 4.19 - will only read 1 humidity sensor.
4.19 8/10/2001 Code compaction only.
4.18 7/22/2001 Added REV and RLT commands.

4.17

7/9/2001

Added support for V3 OWWS by AAG.  Added NOR command to set true north on OWWS.  Added RLB command to control all Relays at once.

4.16

7/7/2001 Beta version of DS2450 based weather station support

4.15

6/16/2001

Added QTY command

4.14

5/27/2001

Added capability of connecting multiple humidity sensors

4.13

5/12/2001

Added CRC command

4.12

3/20/2001

Added humidity sensor capability and increased temperature display precision


Introduction  News Version 5 Upgrade Description  Schematic  Construction  Testing  Instructions Software Vintages References  Ordering Info Download the Instruction Manual Here HomeSeer Setup


Last Updated February 03, 2017

midon design 2000-2017

P.O. Box 1784

Suwanee, GA  30024 USA

Please report any problems with this site to